Joerns EasyCare Bed - Features and Specifications; Electrical Specifications; Environmental Conditions; Bed Identification Numbers

5
Joerns® Bed Frames
EasyCare®
©2023 Joerns Healthcare • 6110444 RevA • 000547
Electrical Specifications
Voltage: 100-240 VAC
Frequency: 50/60 Hz
Power: 420 VA
Classication: Class I, Type B
Mode of Operation: 10% Maximum Duty Cycle
2 minutes on/18 minutes o󰀨
Circuit Protection: Auto Reset Current Sensor
Standby/Sleep Power: 0.5W
Environmental Conditions
Operating Conditions:
Ambient Temperature: +10°C to +35°C
Relative Humidity: 30% to 75% Non-Condensing
Atmospheric Pressure: 700 hPa to 1060 hPa
Protected Against Splashing Water: IPX4
Storage and Shipping Conditions:
Ambient Temperature: -40°C to +70°C Relative
Humidity: 10% to 100%
Atmospheric Pressure: 500 hPa to 1060 hPa
Features and Specifications
Standard Features
• Sleep Surface:
• Fixed Width 35" x 80"
• Integrated Width 35" - 42" x 80"
• Travel Range: 7" to 30"
• AdvanceCare 5-Function Control with 30°/45° Care
Pauses, Comfort Chair, and AutoTransfer Height
• On-Pendant Lockout Indicators
• Locking System with Heavy-Duty Casters:
• Roll-in-Low Lock System
• Care-Lock Roll at any Height Mobility
• Pendant Jacks on both left and right side
• Whisper Quiet DC Actuators
• Welded Tubular Frame
• Grid Sleep Surface
• SoftTone Frame Color
• Baseboard Bumper
• Wide Stable Base
• Mattress Stops
• Patented Lifting Mechanism (US Patent 6473922)
• EasyLift Leg Positioner
Accessories And Options
• 80” and 84” Joerns
®
Mattresses
• 4" and 8" Length Extensions
• Joerns Bed Panels
• F18 SoftCare ½ Length Assist Device Set
• F14SC Assist Device Set
• F025 Assist Handle
• F026 Assist Device
• F028 Deluxe Assist Device
• Sta󰀨 Control with Lockout and Underbed Light Control
• Programmable Gravity Assist, Trendelenburg,
AutoTransfer Height
• Programmable SafeLight underbed light
(3 intensities)
• IV Rod
• Floor Mat
• On-Board Battery Back-up Accessory
• Drainage Bag Holder
Mechanical Specifications
Description: Dimensions:
80" ......................................84.25"L x 35.0"W x 7.65"H
Weight
Roll-in-Low .................................... 220 lbs. (99.8 kg)
Roll at any Height ........................ 230 lbs. (104.3 kg)
Care-Fit Integrated Width ................. +40 lbs. (18.1 kg)
Maximum Back Angle ......................... 65° to horizontal
Maximum Knee Angle ........................35° to horizontal
Maximum Knee To Leg Angle ................................. 45°
Minimum Height Mattress Support Surface
Roll-in-Low ........................................................7.00"
Roll at any Height ..............................................7.65"
Maximum Height Mattress Support Surface
Roll-in-Low ......................................................30.00"
Roll at any Height ............................................30.65"
Safe Working Load ............................ 600 lbs. (272 kg)
Maximum Patient Weight ................... 550 lbs. (249 kg)
Bed Identication Numbers
When ordering parts or when contacting our Customer
Care Department, please include the bed’s model,
product and serial numbers, found on the identication
labels. The identication labels are located on bed
frame under the sleep deck foot section.
Conforms To:
AAMI STD ES60601-1
IEC STD 60601-1
IEC STD 60601-2-52
Certied To CSA STD C22.2 # 60601-1
I.D. Label Symbol Definition
Attention
Consult accompanying documents
Safe Working Load
Maximum Patient Weight
Type B Applied Parts, user controls, mattress,
support platform
Protective Earth (ground)
Pinch Point