Joerns EasyCare Bed - Bed Controls and Functions; One-Touch Button Positioning; Staff Control Panel Operation

9
Joerns® Bed Frames
EasyCare®
©2023 Joerns Healthcare • 6110444 RevA • 000547
One-Touch Button Positioning
Back Section 30° / 45° Pause: Press and hold the
back raise or lower button to reposition as normal. The
back section will pause at 30° and 45°. Continue to
press the button to reposition as needed.
Hi / Low Pause: Press and hold the bed Hi / Low
button, when the bed reaches the AutoTransfer Height
in either direction the bed will pause. Continue to press
or press again to reposition as needed. To change
to a tailored transfer height, use the programmable
AutoTransfer Height function on sta󰀨 control.
Comfort Chair: Press and hold to raise the knee, tilt the
bed, and raise the back section for a reclining position.
To exit Comfort Chair, use AutoTransfer Height.
AutoTransfer Height: Press and hold to level the
bed, atten the head and knee, and lower to a transfer
height. To change to a patient-specic transfer height,
use the programmable AutoTransfer Height function on
sta󰀨 control.
Sta Control Panel Operation (Optional)
(Figure 20)
The sta󰀨 control panel allows the caregivers to operate
the bed from the foot panel without walking to the
bedside. The caregiver can also individually lock out
all functions, both pendant and sta󰀨 control.
1. To lock out a function, press and hold the “Lock”
graphic on the panel and push the function to
lock out. Illuminated amber LED indicates that the
function is now locked out on both pendant and
sta󰀨 control.
2. To unlock a function, press and hold the “Lock”
graphic on the panel and push the function to
unlock. Amber LED is no longer illuminated,
signaling that the function is now operable on both
pendant and sta󰀨 control.
Pendant Operation
BACK SECTION:
Raise / lower back
KNEE SECTION:
Raise / lower knee
BED HI-LOW:
Raise / lower bed
COMFORT CHAIR
AUTOTRANSFER
HEIGHT: Lower
back / knee to
at. Place bed at
transfer height.
Figure 19
Sta Control (Optional)
BACK SECTION:
Raise / lower back
BACKLIGHT
FUNCTION
BUTTON (OR
SAFELIGHT
ACCESSORY,
IF
INSTALLED)
KNEE SECTION: Raise / lower knee
BED HI-LOW:
Raise / lower bed
COMFORT CHAIR
TREND / REV TREND
LOCK FUNCTION:
Change lockout
status in combination
with function button
AUTOTRANSFER HEIGHT: Lower
back / knee to at. Place bed at low height
Figure 20