Need help?Do you have a question about the Johnson Controls FireClass FC702S and is the answer not in the manual?
General| Model | FC702S |
|---|---|
| Manufacturer | Johnson Controls |
| Type | Fire Alarm Control Panel |
| Battery Backup | Yes |
| Number of Zones | 2 |
| Operating Temperature | -5°C to +40°C |
| Input Voltage | 230V AC |
| Compatibility | FireClass devices |
Highlights critical safety warnings, especially regarding high voltages and electrical safety.
Provides step-by-step instructions for physically mounting the panel to a wall.
Details the procedure for safely connecting mains power and the protective earth.
Instructions for performing insulation resistance tests on installed loops.
Specific steps for installing batteries in FC700 series panels.
Instructions for mounting FC1DS and FC8AS repeater panels.
Instructions for installing batteries in the FC8AS repeater unit.
Checklist for ensuring all installation steps are completed correctly.
Instructions for installing the FC-FI Field Interface Board.
Step-by-step guide for replacing fuses on the FC-FI board.
Detailed guide for installing the PLX800 loop expansion card.
Instructions for installing the PN1800 network interface card.
Guide for replacing fuses on the PN1800 network interface card.
To Next Page
