Need help?Do you have a question about the Johnson Controls FireClass FC702D and is the answer not in the manual?
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| Max Loops | 2 |
| Compliance | EN 54-2, EN 54-4 |
| Communication Protocol | FireClass Protocol |
| Operating Temperature | -5°C to +40°C |
| Power Supply | 230 VAC, 50/60 Hz |
| Battery Backup | 24V DC |
| Display | LCD |
| Humidity Range | 10% to 95% RH, non-condensing |
| Certifications | CE |
Highlights critical safety warnings related to high voltage and earthing.
Details the procedure for securely mounting the panel to a wall.
Explains how to safely connect the mains power and protective earth.
Guidance on selecting and installing compliant fire alarm system batteries.
Final checks to ensure correct and secure installation of the system.
Detailed instructions for installing the FC-FI Field Interface Board.
How to make local connections on the FC-FI board.
Details on connecting supervised inputs to the FC-FI board.
Visual guide and checks for FC-FI board connections.
Procedure for replacing user-changeable fuses on the FC-FI board.
Step-by-step instructions for installing the PLX800 loop expansion card.
Instructions for installing the PN1800 network interface card.
Procedure for replacing the user-changeable fuse on the PN1800 card.
Instructions for installing IOB800 and FB800 boards.
Details the process of mounting these boards in FC702D/718/708 panels.
To Next Page
