Need help?Do you have a question about the Johnson Controls FireClass FC700 Series and is the answer not in the manual?
Defines the guide's purpose, intended users, and excluded topics.
Explains hazard symbols and general safety precautions for panel installation.
Step-by-step instructions for securely mounting the panel housing to a wall.
Procedures for safely connecting mains power and ensuring proper earthing.
Guide on loop wiring, temporary connections, insulation checks, and final connections.
Detailed steps for connecting batteries to the FC-FI board and within the panel.
Instructions for mounting repeater housings and connecting FC1DS/FC8AS repeaters.
Procedure for installing batteries specifically for the FC8AS repeater.
Providing installation documentation and conducting final system inspections.
Making connections, setting supervised inputs, sounders, and configuring switches/jumpers.
Procedure for safely replacing user-changeable fuses on the FC-FI board.
Installing PLX800, PN1800, and configuring their addresses and settings.
Mounting IOB800/FB800 boards, CCU3/MOXA, and configuring their functions.
Installing Zonal Indicators and detailing FC1DS GUI configurations.
Using lookup tables for setting DIP switch addresses on slot cards.
General| Devices per loop | 127 |
|---|---|
| Power Supply | 24 VDC |
| Display | LCD |
| Max Notification Appliance Circuits | 4 |
| Networking | Yes |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Type | Addressable Fire Alarm Control Panel |
To Next Page
