Need help?Do you have a question about the Johnson Controls FireClass FC708 and is the answer not in the manual?
General| Type | Addressable Fire Alarm Control Panel |
|---|---|
| Number of Zones | 8 |
| Auxiliary Relays | 2 programmable relays |
| Event Log | Up to 1000 events |
| Relative Humidity | 95% non-condensing |
| Battery Backup | 7 Ah |
| Communication Ports | RS-485 |
| Operating Temperature | 0°C to 49°C |
| Compliance | EN54-2 |
| Power Supply | 24 VDC |
Provides step-by-step instructions for physically mounting the panel to a wall.
Details the procedure for safely connecting the panel to mains power and protective earth.
Outlines the process for installing and connecting loop wiring.
Describes how to run loop wiring and make temporary connections for testing.
Details the procedure for performing insulation resistance tests on loops.
Guides on measuring and recording loop resistance values.
Describes the final connection of loop wires to their respective connectors.
Step-by-step instructions for installing batteries in FC700 series panels.
Provides instructions for mounting the housing of repeater panels.
Step-by-step instructions for installing batteries for the FC8AS repeater.
Introduces the installation of the FC-FI board.
Provides instructions and safety warnings for replacing fuses on the FC-FI board.
Step-by-step guide for installing the PLX800 loop expansion card.
Guides on installing the PN1800 network interface card.
Instructions for replacing a fuse on the PN1800 card.
To Next Page
