FIRECLASS Fire detection system Provide Installation Records
Installation Guide Doc. version 2.0 20
8 Provide Installation Records
Make sure you provide the site personnel with all rele-
vant information, such as cable routing diagrams and
wiring test results.
9 Make Final Checks
1 Make sure all power and signal cabling is connected
securely, with the correct polarity.
2 Make sure all power and signal cables are neatly
routed and arranged in the housings.
3 Make sure all the earth cables are connected
securely.
4 Make sure all installed cables and signal wires are
adequately labelled.
5 Make sure the housings are clean and tidy – for
example, make sure all wiring off-cuts are removed.
Fig. 17: Batteries for the FC8AS repeater
To Next Page
Loading...