Johnson Controls IQ4 HUB - Page 144

CUSTOMIZATION
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 144 198
CONNECTING TO WI-FI
FIND IT
WI-FI
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
To connect to a Wi-Fi network, follow
the steps below:
Touch Advanced Settings (Installer Code)
Then touch “Wi-Fi”
Available networks appear in a list. Touch the desired
network and use the keyboard to type the password (if
required).
Enable Wi-Fi if not already active
Swipe down from the top menu bar
and select settings.
Note: Frequency, PMF and more can be changed under Advanced Settings