EasyManua.ls Logo

Johnson Controls JHET Series - User Manual

Johnson Controls JHET Series
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Johnson Controls Ducted Systems 6112628-UIM-B-0622
Standard ECM Single Piece
Multi-position Air Handlers
Models: JHET Series
- 208/230 V - Single and Three-Phase
INSTALLATION MANUAL
®
List of sections
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Unit installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ductwork and connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Coil metering devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Refrigerant line connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Condensate drain connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Electric heater installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Line power connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Low voltage control connections . . . . . . . . . . . . . . . . . . . . . . . . .11
Blower speed connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Unit data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Air system adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Installation verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Control wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Start-up sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
List of figures
Return air duct attachment and component location . . . . . . . . . . . . . 2
Pressure check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions and duct connection dimensions . . . . . . . . . . . . . . . . . . 3
Typical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Horizontal baffle plate installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Suspension support locations for horizontal applications . . . . . . . . . 6
Duct attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Ductwork transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Recommended distributor adjustment . . . . . . . . . . . . . . . . . . . . . . . . 7
Piston installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TXV installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
TXV bulb and equalizer line installations . . . . . . . . . . . . . . . . . . . . . . 8
Correct bulb location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Grommets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Line power connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Blower speed connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Duct static measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Drain traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Location of coil trapped and plugged drain connections . . . . . . . . . .20
Wiring diagram - standard ECM - single phase heat kits . . . . . . . . .21
Wiring diagram - 208/230V three phase heat kits . . . . . . . . . . . . . . .22
Standard ECM AH conventional wiring diagrams . . . . . . . . . . . . . . .23
HMH7 HP connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
List of tables
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Horizontal suspension dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Physical and electrical data - cooling only . . . . . . . . . . . . . . . . . . . . 12
Electrical data - cooling only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Electrical heat: minimum fan speed . . . . . . . . . . . . . . . . . . . . . . . . . 12
Application factors - rated CFM versus actual CFM . . . . . . . . . . . . . 12
kW and MBH conversions - for total power input requirement . . . . . 13
Electric heat performance data: 208/230-1-60 and 208/230-3-60 . .13
Electrical data for single source power supply: 208/230-1-60 . . . . .13
Electrical data for multi-source power supply: 208/230-1-60 . . . . . .15
Electrical data for single source power supply: 208/230-3-60 . . . . .15
Electrical data for multi-source power supply: 208/230-3-60 . . . . . .16
Airflow data (CFM per Watts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Section I: General
The single piece air handler series provides the flexibility for installation
in any position. This unit may be used for upflow, downflow, horizontal
right, or horizontal left applications.
These units may be located in a closet, utility room, attic, crawl space,
or basement. These versatile models may be used for cooling or heat
pump operation with or without electric heat.
Top or side power and control wiring, color coded leads for control wir-
ing, and electric heaters all combine to make the installation easy and
minimize installation cost.
Electric heat kits are available as field installed accessories. Single
phase kits are available from 2.5 kW to 25 kW and 208/230 V three
phase kits are available from 10 kW to 25 kW.
Section II: Safety
This is a safety alert symbol. When you see this symbol on
labels or in manuals, be alert to the potential for personal
injury.
Understand and pay particular attention to the signal words DANGER,
WARNING, or CAUTION.
DANGER indicates an imminently hazardous situation, which, if not
avoided,
will result in death or serious injury.
WARNING indicates a potentially hazardous situation, which, if not
avoided,
could result in death or serious injury.
CAUTION indicates a potentially hazardous situation, which, if not
avoided
may result in minor or moderate injury. It is also used to
alert against unsafe practices and hazards involving only property dam-
age.
WARNING
FIRE OR ELECTRICAL HAZARD
Failure to follow the safety warnings exactly could result in serious
injury, death or property damage. A fire or electrical hazard may result
causing property damage, personal injury or loss of life.
!

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Johnson Controls JHET Series and is the answer not in the manual?

Johnson Controls JHET Series Specifications

General IconGeneral
BrandJohnson Controls
ModelJHET Series
CategoryAir Handlers
LanguageEnglish

Summary

General Information and Unit Overview

Safety Guidelines and Warnings

Fire or Electrical Hazard Warning

Emphasizes potential risks of serious injury, death, or property damage from improper installation.

Storage Area Restrictions

Appliance Usage Limitations

Installation Hazard and Compliance

Essential Safety Requirements

Unit Inspection Procedures

Handling and Transport Precautions

Unit Installation Guidelines

Unit Sizing and Clearances

Covers unit sizing based on calculations and required installation clearances.

Location and Configuration

Discusses location considerations and how to configure the unit for airflow.

Conversion and Baffle Plate Installation

Horizontal Application Positioning

Ductwork and Connections

Ductwork Guidelines and Suspension

Covers duct connection rules, horizontal suspension, and duct flanges.

Unit Connections and Air Filters

Coil Metering Devices

Piston Metering Device Installation

Step-by-step guide for installing a piston metering device.

Thermal Expansion Valve (TXV) Installation

Refrigerant Line Connections

Refrigerant Line Connection Steps

Outlines the process for connecting liquid and suction lines, brazing, and sealing.

Condensate Drain Connections

Electric Heater Installation

Line Power Connections

Low Voltage Control Connections

Blower Speed Connections

Physical and Electrical Data (Cooling Only)

Electrical Data Summary (Cooling Only)

Electrical Heat Minimum Fan Speed

kW and MBH Conversion Factors

Electric Heat Performance Data (Single Phase)

Electrical Data (Single Source, 208;230-1-60)

Electrical Data (Single Source, 208;230-1-60) - Continued

Electrical Data (Multi-Source, 208;230-1-60)

Electrical Data (Single Source, 208;230-3-60)

Electrical Data (Single Source, 208;230-3-60) - Continued

Electrical Data (Multi-Source, 208;230-3-60)

Airflow Data (CFM per Watts)

Airflow Data (CFM per Watts) - Continued

Routine Maintenance Procedures

Air System Adjustment

Installation Verification Checklist

Drain Connection Locations

Wiring Diagrams

Standard ECM Single Phase Heat Kits Wiring

Wiring diagram for standard ECM units with single phase electric heat kits.

208;230 V Three Phase Heat Kits Wiring

Control Wiring Diagrams

Standard ECM AH Control Wiring Examples

Shows control wiring diagrams for ECM units with different multi-stage and single-stage systems.

HMH7 HP Connection Diagram

Equipment Start-up Sheet

Owner and Equipment Information

Fields for owner details, unit information, and installation type.

Unit Location, Connections, and Filters

Verification of unit leveling, duct/drain connections, and filter installation.

Electrical and Airflow Setup

Inspection of electrical connections and configuration of airflow settings.

Other Switches and Settings

Configuration of humidistat, AC/HP mode, and continuous fan settings.

Electric Heat Details and Job Site Clean-up

Unit Operation Testing and Owner Education

Additional Job Details and Comments

Related product manuals