Johnson Controls JMET Series User Manual

Subject to change without notice. Published in U.S.A 6139716-UIM-A-0422
Copyright © 2022 by Johnson Controls. All rights reserved. Supersedes: Nothing
York International Corp.
5005 York Drive
Norman, OK 73069
Explain operation of system to the owner.
Job site clean-up
Owner education
Comments and additional job details
Provide the owner with the owner's manual.
Explain thermostat use and programming (if applicable) to the owner.
Unit operation and cycle test
(complete all that apply)
Operate the unit through continuous fan cycles from the thermostat, noting and correcting any problems.
Operate the unit through cooling cycles from the thermostat, noting and correcting any problems.
Operate the unit through mechanical heating cycles from the thermostat, noting and correcting any problems.
Operate the unit through emergency heating cycles from the thermostat, noting and correcting any problems.
Job site has been cleaned, and indoor and outdoor debris removed from job site.
Tools have been removed from unit.
All panels have been installed.
Heating return air
dry bulb temperature
Number
of elements
Heating supply air
dry bulb temperature
Air temperature rise
Electric heat kit: Model number Serial number Rated kW
Heater 1
Heater 6
Heater 3
Heater 5
Heater 2
Heater 4
Heater 1
Heater 4
Heater 2
Heater 5
Heater 3
Heater 6
Electric heat (complete all that apply)
Measured voltage (V)
Measured amperage (A)
Explain the importance of regular lter replacement and equipment maintenance.

Johnson Controls JMET Series Specifications

General

Brand	Johnson Controls
Model	JMET Series
Category	Air Handlers
Language	English