Johnson Controls Penn System 450 Series User Manual

System 450™ Series Modular Control Systems with Standard Control Modules Technical Bulletin 5
System 450™ Series Modular Control Systems with
Standard Control Modules
Technical Bulletin
Document Introduction
This document describes System 450™ features and functions, and provides
guidelines and instructions for designing, selecting, installing, setting up, and
troubleshooting System 450 control systems that use System 450 standard control
modules or the System 450 control module with Hybrid Analog Output
(C450CBN-x, C450CCN-x, C450CPN-x, C450CQN-x, and C450CPW-100
models).
This document also provides information and instructions for selecting, installing,
and setting up sensors, expansion modules, and the power module in your control
systems with standard control modules or the hybrid analog control module.
This document also provides System 450 Technical Specifications on page 67 and
references to System 450 Related Documentation.
In this document, control module refers to the System 450 standard control
modules noted previously and the System 450 hybrid analog output control
module. Hybrid analog output refers only to the System 450 hybrid analog
output control module (C450CPW-100).
Note: For information regarding System 450 reset control modules
(C450RxN-x) and control systems that use reset control modules, refer to
the System 450 Series Modular Control Systems with Reset Control
Modules Technical Bulletin (LIT-12011842).
Note: For information regarding System 450 control modules with network
communications, refer to the System 450 Series Modular Control Systems
with Communications Control Modules Technical Bulletin (LIT-12011826).
Related Documentation
Table 1 provides references to System 450 related documentation, including sensor
installation instructions.
Table 1: Related Documentation (Part 1 of 2)
For Information On See Document LIT or Part Number
System 450 Series Features, Benefits,
Models, and Technical Specifications
System 450 Series Modular Control
Product Bulletin
LIT-12011458
System 450 Series Features, Benefits,
Models, and Technical Specifications
System 450 Series Modular Control
Catalog Page
LIT-1900549
Installing, Wiring, and Setting up
System 450 Control Modules with Relay
Output
System 450 Series Control Modules with
Relay Outputs Installation Instructions
Part No. 24-7664-2675
Installing, Wiring, and Setting up
System 450 Control Modules with
Analog Output
System 450™ Series Control Modules with
Analog Outputs Installation Instructions
Part No. 24-7664-2853

Johnson Controls Penn System 450 Series Specifications

General

Brand	Johnson Controls
Model	Penn System 450 Series
Category	Control Systems
Language	English