Johnson Controls SABROE ComPAC - Identification; Identification of Equipment

Operating manual - ComPAC
12/56
011769 en 2020.03
Safety
2.2 Identification
2.2.1 Identification of equipment
All equipment from Johnson Controls Denmark can be identified by one or several name plates
positioned as illustrated in the following drawing:
Fig. 1: Identification of equipment
Pos. no.
Name plate for
1
Compressor
2
Evaporator/Cascade cooler
3
Condenser/Receiver
4
Float housing
5
Vessel
6 Vessel
7
Unit/piping system
8
Motor