To Next PageTo Next Page
Need help?Do you have a question about the Johnson Controls York YCAL0014E Series and is the answer not in the manual?
General| Brand | Johnson Controls |
|---|---|
| Model | York YCAL0014E Series |
| Category | Chiller |
| Language | English |
Details the structure and components of the model number, including product type, capacity, and designator.
Provides examples illustrating the product identification numbering system.
A list of items to verify before placing units in operation, covering shipping, piping, and system checks.
Requirements for unit placement, ventilation, air supply, and service access.
Recommendations for unit mounting surfaces, including level foundations and support.
Guidelines for connecting chilled water piping, including layout, material, and cleanliness.
Overview of the chiller's control system interface, components, and functions.
Details the functions of the 12-button keypad for user interaction and parameter access.
Explains system and unit faults that cause shutdown, categorized into system and unit safeties.
Describes keys for programming cooling setpoints, schedule, and safeties.
Manages chiller operation based on leaving chilled liquid temperature setpoints and ranges.
Manages chiller operation based on return chilled liquid temperature, including compressor staging.
Prevents short cycling of compressors to ensure longevity and reduce motor heating.
Explains condenser fan control based on ambient temperature and discharge pressure.
Accessing special modes for unit configuration, parameter viewing, and diagnostics.
Configuring chiller settings like soft start, refrigerant type, and expansion valve type.
A guide to identifying and resolving common operational problems based on symptoms and causes.
Provides a reference for ISN operational and fault code meanings for system monitoring.
Illustrates the control circuit wiring for specific models, detailing component connections.
Illustrates the power circuit wiring for specific models, showing electrical supply connections.
Illustrates the control circuit wiring for specific models, detailing component connections.
Illustrates the control circuit wiring for specific models, detailing component connections.
Specifies isolator selections based on deflection and VMC type for aluminum fin coils.
Specifies seismic isolator selections based on VMC type for aluminum and copper coils.
Installation and adjustment instructions for Type CP isolator mountings.
Steps for installing and adjusting AEQM spring-flex isolator mountings.
