Operating manual - ComPAC
011769 en 2020.03
3/56
Manual for ComPAC with screw compressor
The chiller unit can be configured with various types of equipment depending on its function and
requirements.
Some of the equipment may be described in this manual even though it is not featured on your
particular unit.
Please note that this manual does not include instructions for the:
Compressor
Unisab III controller
You can find the compressor number and the equipment configured on your unit below.
Compressor type
Designation
Compressor no.
Refrigerant
R717
Oil type
PAO68
Other _____________
Level control
Mechanical float valve Electronic valve
Approval
PED (2014/68/EU)
Other _____________
Supply voltage
Motor 3 x _________ V/ _________ Hz
Control 1 x _________ V / _________ Hz
Drive type
Fixed speed
Variable speed
Motor
IP23 IP55
Power _________ kw Size IEC _________
Ex-execution
Both compressor and unit are safeguarded
ECO-design
Standard process chillers only:
EER
A
_______ SEPR _______
To Next Page
Loading...
