Johnson Controls T2000 series - Mounting and Installation; Thermostat Mounting Guidelines; Product Dimensions; T2000 Series Physical Specifications

2 T2000 Series – Line Voltage Fan Coil Unit Thermostat Product Bulletin
MOUNTING
T2000 is designed for surface wall mounted, using two #8 drywall screws and anchors for drywall
installation and can be mounted on 75 x 75 x 35mm wall electrical box.
Recommended mounting level is 1.5 meter above floor finishing level. Avoid mount where
thermostat can be affected by drafts, radiant heat from the sun or other sources of heat.
HEAT
OFF
COOL
HIGH
MED
LOW
Y62x Installation T2000-xAx Installation T2000HHx Installation
DIMENSIONS
T2000xxx-0C0
88.00mm.
133.00mm.
25
30
15
10
20
HEAT
OFF
COOL
HIGH
MED
LOW
42.50mm.
T2000HHx-0C0 Y62x-0
34.00mm.
19.00mm.
84.00mm.
84.00mm.
25
30
15
10
20
83.50mm.
86.00mm.
HEAT
OFF
COOL
HIGH
MED
LOW
13.00mm. 24.00mm.