Johnson Controls VA-7481-0011 User Manual

PB_VA-748x_12 2012
9
Proportional model VA-7482-x001 (suitable for the V5000, VG6000 and VP1000)
For proportional actuator suitable the V5000, VG6000 and VP1000 the jumper allow the user to set the actuator stroke.
VA-7482-1001■(suitable■for■VG6000■and■VP1000■-■DN15■and■DN20)
The actuator is factory set with stroke 3.2 mm but at convenience the stroke can be changed to 4.3 mm or 6.0 mm in case
the same actuator is mounted on competitors valves.
VA-7482-2001■(suitable■for■V5000)
The actuator is factory set with stroke 4.3 mm but at convenience the stroke can be changed to 3.2 mm or 6.0 mm in case
the same actuator is mounted on competitors valves.
VA-7482-3001■(suitable■for■VP1000■-■DN25■and■DN32)
The actuator is factory set with 6.0 mm but at convenience the stroke can be changed to 3.2 mm or 4.3 mm in case the
same actuator is mounted on competitors valves.
3,2 mm 4,3 mm 6 mm

Johnson Controls VA-7481-0011 Specifications

General

Brand	Johnson Controls
Model	VA-7481-0011
Category	Controller
Language	English