Installation, Operation and Maintenance Manual : 036-1011(0806)
Page 4
NOMENCLATURE
INSTALLATION
Read these instructions before continuing this appliance
installation. This is an outdoor combination heating and
cooling unit. The installer must assure that these instructions
are made available to the consumer and with instructions to
retain them for future reference.
LIMITATIONS
These units must be installed in accordance with the
applicable national and local safety codes. (Refer to Unit
Application Data table).
If components are to be added to a unit to meet local codes,
they are to be installed at the dealer’s and/or the customer’s
expense. Size of unit for proposed installation should be
based on heat loss/heat gain calculation.
TABLE 1 : UNIT APPLICATION DATA
To Next Page
Loading...
Need help?
General
