Johnson Pump Top Wing Series - 4.0 Disassembly and Assembly Instructions; 4.1 Tools Required for Service

30 A.0500.301/314.C – IM-TW/10.00 GB (0401)
4.0 Disassembly and assembly instructions
4.1 Tools to be used
Type Size TW1 TW2 TW3 TW4
Combination spanner 10 mm X
Combination spanner 13 mm X X
Combination spanner 17 mm X
Combination spanner 19 mm X X X X
Combination spanner 22 mm X X X X
Combination spanner 24 mm X
Combination spanner 30 mm X
Hexagon (Allen) key 4 mm X
Hexagon (Allen) key 5 mm X
Hexagon (Allen) key 6 mm X X X X
Hexagon (Allen) key 8 mm X X X X
Hexagon (Allen) key 10 mm X
Hexagon (Allen) key - Socket driven 4 mm X
Hexagon (Allen) key - Socket driven 5 mm X
Hexagon (Allen) key - Socket driven 6 mm X X X X
Hexagon (Allen) key - Socket driven 10 mm X X X X
Hexagon key - Socket driven 13 mm X X
Hexagon key - Socket driven 17 mm X
Hexagon key - Socket driven 19 mm X X X X
Hexagon key - Socket driven 22 mm X X X X
Hexagon key - Socket driven 24 mm X
Hexagon key - Socket driven 30 mm X
Torque wrench Adjustable up to min. xx Nm X
Torque wrench Adjustable up to min. xx Nm X
Torque wrench Adjustable up to min. xx Nm X
Torque wrench Adjustable up to min. xx Nm X
Depth micrometer 0 – 25 mm X X X X
Feeler gauge set – X X X X
Retainer tool Supplied with pump X X X X
Hook spanner HN5 X
Hook spanner HN9/10 X
Hook spanner HN12/13 X
Hook spanner HN16/17 X
Soft-faced mallet X X X X
Steel hammer X X X X
Screwdriver XXXX
Ball bearing extractor X X X X
A selection of special tools is available, see chapter 5.0