Johnson Pump Top Wing Series - 5.6 Shaft Synchronization Tool Kit; 5.7 O-ring Disassembly Tool

54 A.0500.301/314.C – IM-TW/10.00 GB (0401)
5.6 Tool kit for synchronization of the pump shafts
Purpose: To adjust the position of the shafts against each other (see section 4.7.6.2)
5.7 Tool for disassembly O-ring seal TW1
Purpose: To disassemble the support ring from the rotor case
(see sections 4.6.2.4 and 4.6.2.5)
All dimensions in mm
Pump Type Article number
TW1 3.01983.01
TW2 3.01983.11
TW3 3.01983.21
TW4 3.01983.31
Pump Type Article number
TW1 3.94998.11