10 ©2015 Johnson Level & Tool
turn off the tilt mode and will allow the laser to re-level and start
rotating again. Press the tilt mode button again to enter tilt mode.
Vibrate V-W-S Button
Press the Vibrate V-W-S button and the Vibrate V-W-S LED
will turn on, which means the laser is in vibrate mode.
Vibrate mode allows continuous operation during high winds,
vibrations and shocks. Slight movements are ignored and the laser
only enters Tilt mode if significant movement occurs. Press the
Vibrate V-W-S button again to turn vibrate off.
8488H-English_Manuals 11/11/14 2:36 PM Page 10
To Next Page
Loading...
