©2015 Johnson Level & Tool 7
(4) Used (discharged) batteries are hazardous waste and should be
disposed of properly.
Before Using the Laser
When you charge the new battery or one which has not been used for
long periods of time, it may not reach full charge until after you have
discharged it fully in use and recharge it several times.
Instrument Usage
1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline battery pack.
2. Place the laser on a tripod, connect it to the tripod using the 5/8"
screw thread at the bottom of the laser.
Note: If the laser is inclined beyond the self-leveling
range, the laser will deliver an audible alarm. You will
need to re-position the laser.
3. Press power button to turn power on.
4. Press the Tilt button to lock in the height of the laser.
5. After finishing operation or before moving the laser, turn the power off.
8488H-English_Manuals 11/11/14 2:36 PM Page 7
To Next Page
Loading...
Need help?
General
