Johnson C7000 - Crank Replacement Procedure

CRANK REPLACEMENT PROCEDURE
Tools required:
 Crank extractor
the axle.
 Coin
 Open-end
wrench
(14&17mm)
Procedure:
1 Loosen the crank
cover with a coin and
remove it.
2 With the crank
extractor and
open-end wrench
loosen the screw
attaching the crank to
3 Using the crank extractor and open-end wrench to
extract the crank then replace it with a new one.
4 Reverse step 1-3 to install the parts