AXLE REPLACEMENT PROCEDURE
Tools required:
screwdriver
Hex key (4mm)
C-Clip Pliers
Wooden
Open-end wrench
(14&17 mm)
Pr
1. er
n the
screws from the side
en remove
the footpad, guard and
. Loosen the belts
(500/440J8&400/380J6)
3. With the C-Clip Pliers
. Replace the axle with a new one, then install the
c-clip by using c-clip pliers.
. Reverse the step 1-3 to install the parts.
Philips
hammer
Coin
Crank extractor
Hex key (4mm)
ocedure:
Remove the crank cov
and screw, then remove
the crank. Loose
cover with the
screwdriver, th
side covers.
2
from the axle
remove the C-clip.
4. With the wooden hammer tap the axle out
5
6
To Next Page
Loading...
Need help?
General
