Johnson C7000 - Cleaning the Grooves

CLEANING THE GROOVES
Frequency: Every 3
to 4 months.
If there is any dust in the
grooves of the Poly-V belts
and pulleys, noises will be
generated during operation..
Procedure:
1 Remove the
Poly-V belts and
check the grooves
of the belt for dirt
or dust and clean
it if any.
2 Check the
grooves in the
pulley for dirt or
dust and clean it
if any.
3 Check the
grooves in the
roller pulley for
dirt or dust and
clean it if any.