Johnson S1-TTSCC01 - Navigating Service Mode with Service Tool; Log Button Functionality in Service Tool

542933-UIM-C-0112
40 Johnson Controls Unitary Products
Navigating Service Mode: Service Tool
Service mode screens on the service tool are the same as described before. However, there is
some functionality of service mode that is not available on the service tool. The following outlines
what is available from the service tool.
Log Button: Service Tool
7. Select the service tool option when prompted.
The system map displayed on the service tool
has all of the information that the master displays.
This includes pressing the equipment icons and
viewing: Equipment Details, Status, and Inputs/
Outputs screens.
The log button is available in service mode. The
user will not be able to enter a new log event or
clear log entries. The other functions of log are
available and are outlined in the Log Button: Mas-
ter Control section of this document.
System Master
Mode
Service Tool
Mode
Demo
Mode
Select the desired mode of operation for this device.
11:07AM Thu 21 Jul
Touch ICON for a detailed view
Log MenuRefresh Accessories
Exit Service Mode
Humidifier
ON
UV Lamps
ON
EAC
Not Installed
Heat Pump
OFF
Thermostat
ON
Furnace
ON
11:07AM Thu 7/21
Log
resh
Accessories
UV La
ON
E
A
C
N
ot I
n
F
urn
a
O
N
Touch ICON for a detailed view
Log MenuRefresh Accessories
Exit Service Mode
Humidifier
ON
UV Lamps
ON
EAC
Not Installed
Heat Pump
OFF
Thermostat
ON
Furnace
ON
11:07AM Thu 7/21
Log
resh
Accessories
UV La
ON
E
A
C
N
ot I
n
F
urn
a
O
N