Joovv Mini - Prepare Devices and Connect Supports

Lay all the included hardware and tools you will
need on a padded surface. Then, place the Joovv Duo
devices face down on a scratch-free surface, such as
carpeting or a blanket.
STEP 1
Next, screw in the threaded posts to the top of both
devices and hand-tighten with the included Allen
wrench. Then, select one of your Joovvs to be the
lead device and screw the cable supports on to the
threaded posts, as shown in Figure A.
STEP 2
FIG. A
(2 people required)
SETTING UP YOUR JOOVV DUO
5.2