Joovv Mini - Hang Hook and Attach Lead Device

Next, hang the door hook on any standard size door,
as shown in Figure B. The door hook will fit any
standard-sized door.
STEP 3
FIG. B
Remove one of the snap links from the height-
adjusting device. Next, connect the cable supports of
your lead device to the snap link. Then, attach the
snap link and lead device to the door hook, as shown
in Figure C.
Note: the height-adjusting system is not required
with the exception of oversized doors.
STEP 4
FIG. C
(2 people required)
SETTING UP YOUR JOOVV DUO
5.3