Joovv Mini - Connect Power and Patch Cables

For instructions on how to use your Joovv Elite with
an optional mounting system, refer to the guide
included with that system. Then proceed to step 5.
STEP 4
Plug the two power cables into devices #1 and #4.
Next, plug patch cables into the male sockets
devices #1 and #4 and the female sockets on devices
#2 and #5. Finally, connect the last two devices by
connecting patch cables into the male sockets of
devices #2 and #5 and the female sockets on devices
#3 and #6, as shown in Figure B.
STEP 5
#4 FOLLOW #5FOLLOW
#6 FOLLOW
#1 Lead #2 Follow #3 Follow
#4 Follow #5 Follow #6 Follow
FIG. B
Optional Mounting Systems
(2 people required)
SETTING UP YOUR JOOVV ELITE
7.3