Joovv Mini - Set Mode Switches and Power On

Locate the mode switches on each device. Turn the
switch on device #1 to “Lead Mode”. Then, turn the
mode switches on the other devices (#2, #3, #4, #5,
and #6) to “Follow Mode”, as shown in Figure C.
STEP 6
Plug the two power cords into a wall outlet. The
devices will automatically pair.
STEP 7
Lead Mode
Neutral
Follow Mode
Lead Mode
Neutral
Follow Mode
Lead Mode
Neutral
Follow Mode
Lead Mode
Neutral
Follow Mode
Lead Mode
Neutral
Follow Mode
Lead Mode
Neutral
Follow Mode
FIG. C
Optional Mounting Systems
(2 people required)
SETTING UP YOUR JOOVV ELITE
7.4