Need help?Do you have a question about the JOPEVI J-239 and is the answer not in the manual?
Critical warnings for safe operation and proper manual interpretation.
Details the machine's identification plate and the information it contains.
Detailed explanation of the machine's components, functionality, and operational mechanisms.
Technical specifications of the machine including dimensions, power, and control panel details.
Specifies required space, electrical connection, and optimal positioning for the machine.
Provides safety guidelines for safely transporting and handling the machine.
Details unloading, leveling processes, and optimal operating environmental conditions.
Essential warnings and instructions to be read before starting the machine's operation.
Highlights the dangerous grommeting zone and describes the IMO V3 electronic control unit.
Explains the J-239 model's design for setting grommets with or without washers, or punching holes.
Provides essential steps for preparing the machine for operation, including lubrication and checks.
Details alternative uses of the machine, such as setting grommets without washers or perforating only.
Emphasizes disconnecting power before any adjustments or manipulations to the machine.
Guides on how to change the grommet model, including part replacements and die changes.
Explains how to adjust cutting and grommeting pressure for different materials and die changes.
Details the procedure for setting grommets without the use of washers.
Instructions for using the machine solely for making perforations in materials.
Information about the optional laser light for precise placement and its safety precautions.
A visual guide to key adjustment points and related parts for quick reference.
Guidance on cleaning and lubricating the mechanical components for optimal performance.
Information regarding the electrical components, stating they require no maintenance.
Addresses issues where the machine fails to operate upon pedal activation.
Diagnoses and provides solutions for problems related to the quality or execution of grommet placement.
Explains causes and fixes for the machine producing multiple simultaneous blows.
Outlines causes and solutions for the machine becoming jammed during operation.
Addresses issues where the machine fails to pick up grommets from the raceway.
Explains why the machine might crush grommet heads and how to fix it.
Discusses problems encountered when setting both grommets and washers.
Further troubleshooting for issues with setting both grommets and washers.
Addresses problems specific to setting grommets without washers.
Solves issues where the machine fails to cut or leaves material residuals.
Details the various protection devices installed on the machine to prevent accidents.
Identifies the dangerous grommeting area and emphasizes safety precautions.
General| Brand | JOPEVI |
|---|---|
| Model | J-239 |
| Category | Industrial Equipment |
| Language | English |
To Next Page