R
MODEL J-239
JOPEVI
PAGE
27
Along with your machine, you will find all the necessary tools to do the required maintenance and adjustments as
follows:
- 1 Puncher
- 1 24mm wrench
- 1 32mm wrench
- 1 2’5mm allen wrench
- 1 3mm allen wrench
- 1 4mm allen wrench
- 1 5mm allen wrench
Included with the machine is a part nº 219 bottom die.
JOPEVI, S.L recommends to have a complete set of dies in stock parts nº: 217 - 218 - 219 and 229.
SUPPLIED TOOLS AND REPLACEMENT PARTS.
TOOLS.
PARTS.
229
218
217
219
Part nº219
Bottom die
Part included
Parts recommended
Complete set
of dies
Note: The pictures are not on
the same size scale.
32mm wrench32mm wrench
24mm wrench24mm wrench
PuncherPuncher
5mm allen wrench5mm allen wrench
2’5mm allen wrench2’5mm allen wrench
3mm allen wrench3mm allen wrench
4mm allen wrench4mm allen wrench
To Next Page
Loading...