R
MODEL J-239
JOPEVI
PAGE
CHAPTER II
TABLE
TABLE
OPERATOR
MACHINE
220 CM
160
CM
2 M.
110V.
INSTALLATION
2.1. MINIMUM SPACE, ELECTRIC INSTALLATION, POSITIONING THE MACHINE.
As we indicate in the lower figure, the operator can work in a seated position.
The minimum space recommended is 220 cm width by 160 cm depth.
THIS MACHINE MUST BE CONNECTED TO A 110V POWER SOURCE.
The machine comes with a 2 meter long cable.
5
Note: The pictures are not on
the same size scale.
Note: The pictures are not on
the same size scale.
The transportation of this machine requires a series of operations.
Some of these operations may imply dangerous situations so please follow the following advise:
- Never stand beneath the cargo.
- Always lift the cargo gently.
- Avoid balancing the cargo.
- No brisk movements.
- Do not place yourself in the cargo moving trajectory.
- Use the correct equipment to move cargos.
- Check this equipment periodically.
2.2. MACHINE HANDLING.
WARNING: WE RECOMMEND NOT TO HAVE THE ELECTRICAL WIRE
TOTALLY STRETCHED.
To Next Page
Loading...