To Next Page
D
Danielle SmithSep 12, 2025
What does 'B iteadc' mean on Jotron Transmitter?
- CChase DavisSep 13, 2025
If your Jotron Transmitter displays 'B iteadc', it indicates a failure in communicating with the bite adc. To solve this, check the Main board.
What does 'B iteadc' mean on Jotron Transmitter?
If your Jotron Transmitter displays 'B iteadc', it indicates a failure in communicating with the bite adc. To solve this, check the Main board.
Covers warnings for handling electrostatic sensitive devices and toxic beryllia.
Outlines general environmental, EMC, and operational specifications for the TR-7750C.
Provides detailed technical specifications for the TA-7650C transmitter unit.
Lists specific technical parameters and performance for the RA-7203C receiver unit.
Details the electrical and physical specifications for the PSU-7002 power supply.
Details how to install the units into standard 19" subracks and cabinet configurations.
Covers antenna connector requirements and AC/DC connector details for installation.
Details various usage configurations like local, remote, and main/backup setups.
Step-by-step guide for setting up a transceiver for local operation with audio interfaces.
Instructions for configuring a transceiver for remote operation using audio lines.
Explains how to configure two transmitters for main/backup automatic switching.
Identifies transmitter alarms, modules affected, probable causes, and corrective actions.
Details receiver alarms, affected modules, probable causes, and recommended corrective actions.
General
