Do you have a question about the Jøtul 520 Series and is the answer not in the manual?
Material | Cast Iron |
---|---|
Fuel Type | Wood |
Log Grate Included | Yes |
Ash Pan Included | Yes |
Finish | Black Paint, Blue/Black Enamel, Ivory Enamel |
Efficiency | 75% |
Emissions | 2.5 g/h |
Burn Time | Up to 8 hours |
Key safety measures to prevent fires and protect the user and surroundings.
Procedures to follow and actions to take during a chimney fire incident.
Requirements for the floor structure and protection against heat transfer.
Specifications for wall clearances and insulation requirements for safe installation.
Details on necessary air vent sizes and their importance for proper operation.
Guidelines for safe clearance and ventilation requirements related to the ceiling.
Explains the function of the chimney and its role in fireplace performance and draught.
Guidance on connecting the fireplace to the chimney and flue pipe system.
Steps and considerations before and during the product's installation process.
Instructions for installing the optional leg rack for specific fireplace setups.
Information on how to change the door hinging from left to right for installation.
Decision-making process and methods for connecting the fireplace to the chimney system.
Specific instructions for setting up the factory-fitted top outlet for the smoke bell.
Steps to convert the smoke outlet to a rear configuration if needed.
Procedures for installing the internal smoke bell and levelling the insert.
Procedures for fitting the internal smoke bell based on different fireplace models.
Crucial steps to ensure the fireplace insert is level during installation.
Guidance on various methods for installing the fireplace within open hearths.
Illustrates installing the fireplace in a corner with ample space, using a metal grid.
Details for installing against a straight wall with side space and low height.
Describes installation against a straight wall with minimal front space.
Steps for inserting the burn chamber into an open fireplace structure.
Explanation of the ignition vent and through air controls for managing the fire.
Step-by-step guide on how to safely and effectively light the fireplace.
Proper techniques for adding wood to maintain optimal heat and combustion.
Critical warnings and actions to prevent the fireplace from overheating.
Information on initial smells due to paint drying and how to manage them.
Guidance on choosing, chopping, storing, and moisture content of wood for optimal burning.
Details on fuel consumption rates and recommended log sizes for nominal output.
Methods for cleaning the fireplace glass using air wash and external aids.
Safe procedures for removing ash from the fireplace when cold.
Tips for removing soot deposits to maintain heating efficiency.
Instructions on how to sweep the flue pipes for optimal performance.
Recommendations for post-cleaning inspection of visible surfaces and seals.
Guidance on cleaning and preparing painted surfaces for potential repainting.
Step-by-step guide for replacing internal components of the fireplace.
Instructions for replacing the air duct and inner bottom parts of the fireplace.
Details on the optional leg rack, including item number for purchase.
Information on the optional door lock kit for right-hinged doors.
Part numbers for different frame options available for the fireplace models.
Details for the optional convection top plate, including item number.
Part numbers for various sheet metal grid options for installation.
Common issues related to poor chimney draught and their potential causes.
Troubleshooting steps if the fire goes out unexpectedly during operation.
Explains factors leading to soot on glass and how to minimize it.
Guidance on how to recycle the product's packaging materials appropriately.
Instructions for disposing of fireplace components like metal and glass responsibly.
Details on what is covered under the Jøtul warranty for parts and defects.
Specifies exclusions from the warranty, such as consumables and misuse.