Jovision CloudSEE Series User Manual

Jovision Home Security Wi-Fi Camera
English Page 11
Time Settings
Time zone and date/time settings are here. (CloudSEE Int'l fig. 13)
You can turn on automatic time calibration or set it manually. Please make sure the
Internet is accessible, otherwise we recommended a manual setting.
CloudSEE Int'l fig. 13 CloudSEE Int'l fig.14
Alarm setting
The alarm setting on the app can only be set to a limited extent. Zone selection must be
made through the free client software.
The app can also make other settings like:
Schedule: The time when motion detection should be active.
Push Notification: You can receive alarm push notification on the app.
Motion Detection: Enable/Disable motion detection.
MD Sensibility: The sensitivity setting of motion detection.
CloudSEE Int'l fig. 15
Important Note
If Alarm Record is selected, you should note that you can select the detection
areas (max. 4) via the free client software and adjust the alarm sensitivity,
which is strongly recommended, otherwise the alarm might be triggered by all
movements on the live image and this can increase the fault alarm rate.

Jovision CloudSEE Series Specifications

General

Brand	Jovision
Model	CloudSEE Series
Category	Security Camera
Language	English