Jovision Home Security Wi-Fi Camera
English Page 4
Prepare the camera
Remove the camera from the package and power the camera on with power supply. The
LEDs on the LAN port should be lit/blinking (not available on all models). On some
devices you will also hear a short sound inside, this is the reset check of the IR-cut.
Here are pictures of the camera interface, which will be helpful for further settings.
Some cameras have different connectors or cables. Depending on what is available, you
can use the reset button, for example, or even the RS-485 serial interface.
Get CloudSEE Int ‘l Pro app
Before we start, you need to download our latest app from the App Store or Google Play
Store. Please open the respective store and enter "CloudSEE Int ‘l Pro" as search term.
Get and install the app on your phone. You can also get the app by scanning the QR
code:
Tip:
By IP-D2W you have to remove the cover after that, you can see and use the
microSD card slot.
To Next Page
Loading...
Need help?
General
