Jovision Home Sicherheits IP Kamera
English Page 12
System setting
Under system setting, the following points can be set:
Reboot: Reboot the camera.
Reset: Restore to factory settings.
Change admin password: A password for the user "admin" can be set.
CloudSEE Int'l fig. 16
More functions
After finishing the installation, you can call up the stream of a camera or nvr. On the Live-
Stream window you have following options to use. These options can only be used with
certain products that also support the functions. We will explain you now the symbols and
the options behind these pictures.
Audio: This option can be used with a camera that has a microphone. So, if the camera
does not have a microphone, you will not hear any sound.
Important Note
As mentioned at the beginning of the short guide, we strongly recommend
giving a password to the user "admin." Otherwise, your camera will be
unprotected.
To Next Page
Loading...
Need help?
General
