Joyetech eVic VTwo User Manual

43
INNOCIGS EVIC VTWO – OPERATING & CHANGING THE MODES
1. Locking and unlocking the coil resistance in VT mode
Note
Press the fire button three times to enter the menu. Turn the control knob to the left twice so the second line displaying
the resistance flashes on the display. Turn the control knob to the right to lock or unlock the resistance of the atomizer.
When the „lock“ symbol is shown on the display, the resistance is locked.
a) Only lock the resistance when the coil is at room temperature. This will ensure that the correct „base resistance“
of the atomizer coil is locked. The temperature control will remain correct, as long as the coil is not replaced. If the
resistance is locked, you can remove the clearomizer regardless of whether the atomizer coil is hot or cold.
b) Before changing to another atomizer coil, unlock the resistance. Otherwise, the VT system will not work properly.
In „Resistance Unlock“ mode, please make sure that the coil is changed at room temperature to ensure temperature
accuracy

Joyetech eVic VTwo Specifications

General

Brand	Joyetech
Model	eVic VTwo
Category	Electronic Cigarettes
Language	English