Joyetech eVic VTwo User Manual

45
INNOCIGS EVIC VTWO – OPERATING & CHANGING THE MODES
3. Adjusting the wattage in VT mode
Note
You can set the maximum power output in VT mode. Press the fire button three times to enter the
menu. Turn the control knob to the left, so that the second line flashes. Then turn it to the right to
adjust the wattage. Confirm this by pressing the fire button.
a) The VT mode supports a maximum resistance of 1.5 ohms. The device automatically switches to the
VW mode when the resistance is more than 1.5 ohms.
b) When using coils with Kanthal winding, the unit will change to VW mode after two seconds.

Joyetech eVic VTwo Specifications

General

Brand	Joyetech
Model	eVic VTwo
Category	Electronic Cigarettes
Language	English