JP Selecta 4002136 - Technical Specifications

J.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
Tel 34 937 700 877 Fax 34 937 702 362
INSTRUCTION MANUAL CODE 80219 REV E
MAR/2017
(It can be modified without notice)
Page: 19
2 General information
2.1 Handle the equipment with care. Unpack and check that all items coincide with
the delivery note. If you see any discrepancy or damage of any kind, notify your
distributor as soon as possible.
2.2 Read this manual before using the equipment.
2.3 These instructions are an important part of the equipment and should be made
available to all users.
2.4 If in any doubt or clarity on the use of this instrument, contact your local dis-
tributor or the service department of J.P. Selecta, s.a.u.
2.5 ATTENTION!! EQUIPMENT NOT CLEAN AND DISINFECTED SHALL NOT
BE REPAIRED.
2.6 Any unauthorized modification, lack of maintenance or deliberate damage to
the machine, transgresses the directive 89/655/CEE where the manufacturer
will not be responsible for damages that could occur due to an undue care and
attention.
2.7 Do not use the equipment for fluids that can produce vapours and that can form
inflammable or explosive mixtures.
3 Technical specifications.
Voltage supply 115-230V 50/60Hz according to the charac-
teristics plate indications.
Código
Code
Capacidad L
Capacity L
Medidas útiles CM
Chamber dimensions CM
Medidas exteriores CM
External dimensions CM
Rango ºC
Range ºC
Potencia W
Power W
Peso Kg
Weight Kg
Dimen.
Alto
Height
Alto
Height
Ancho
Length
Fondo
Width
4002136
80L
40
60
107
58
72
115 a/to
134
3600
100
4002137
150L
50
70
118
80
95
7500
250
DO NOT OPEN THE LID OF THE AUTOCLAVE
IF THE MACHINE IS NOT CONNECTED TO THE
MAINS SUPPLY AND THE MAINS SWITCH IS
ILLUMINATED. IF NOT CONNECTED, DO NOT
FORCE THE DOOR HANDLE.