JPM MPS2 - User Manual

COPYRIGHT
The copyright in programs entered in this machine is
exclusively the property of JPM (Automatic Machines) Limited.
Copyright on all illustrated panels and artwork is also exclusively
the property of JPM (Automatic Machines) Limited.
Copying or any other form of transferring of any program or
artwork thereof from any such machine to any other machine is
expressly forbidden without the written authority ofthe Company.
JPM (Automatic Machines) Ltd.
Hadfield Road, Leckwith Trading Estate.
South Glamorgan, CF1 8AQ. Cardiff ,
Telephone 0222-223000
Telex 497806. Fax 0222238214.

Summary

MPS2 INSTALLATION PROCEDURE

POWER SUPPLY -ELECTRICAL SPECIFICATION

REGULATED LINEAR OUTPUTS

Specifications for regulated +5V, +12V, and -12V DC outputs.

UNREGULATED SUPPLIES

Specifications for unregulated supplies like Lamp, Reel, and Hopper.

MULTIPLEXING -TECHNICAL DESCRIPTION

MAIN BOARD -TECHNICAL DESCRIPTION

Memory Addressing

Details memory addressing, EPROM configuration, and RAM control.

CRU Addressing

Interrupt Interface

Serial Communication

Coin Handling, Switched Inputs and Outputs

Reel Drive Circuitry

MAIN BOARD (MAIN PROCESSOR)

MAIN BOARD (MULTIPLEX LAMPS CONTROL CIRCUIT)

MAIN BOARD (REEL DRIVE PERIPHERAL CONTROLLER)

MAIN BOARD(COIN HANDLING, SWITCHED IPs, & O;Ps)

MAIN BOARD(COMPLEX SOUND & SWITCHED I;Ps)

LINEAR POWER SUPPLY TECHNICAL DESCRIPTION

Single Pole Mains Fuse

LINEAR POWER SUPPLY CIRCUIT DIAGRAM

JPM MPS2 Specifications