JPS RTU-292 - Table 5-1 Command Summary

RTU-292 Operations Manual
When a command is sent to the RTU-292 it is buffered up and acted on as soon as possible.
Once the command has been executed, the RTU-292 will return a "Status" response. The
format of this status response is explained in greater detail in the section 5.4, "Status Returned
From The RTU-292". The RTU-292 is designed to act on one command at a time. The user
must wait for a response from a given command before entering the next command.
Table 5-1 Command Summary
Null Command
<CR> …………………………………….
Auto Answer Command
AUTO_ANS <ON|OFF|?> <CR> …….
Audible Ring Command
AUD_RING <ON|OFF|?> <CR> ……..
Date Command
DATE <ddmmyy> <CR> ………………
Dial Command
DIAL <OPER|LP|number string> <CR>
Disconnect Command
DISC <CR> …………………………….
Generate DTMF command
+DTMF <number string> <CR> ……….
Handset Phone Command
HS_PH <ON|OFF|?> <CR> ………….
Handset Radio Command
HS_RAD <ON|OFF|?> <CR> ………..
Speaker Phone Command
SPKR_PH <ON|OFF|?> <CR> ………
Speaker Radio Command
SPKR_RAD <ON|OFF|?> <CR> …….
Speed Dial Command
SD <nn|ALL> <num|.|?> <CR>
Tel-Line Phone Command
TEL_LINE_PH <ON|OFF|?> <CR> ….
Tel-Line Radio Command
TEL_LINE_RAD <ON|OFF|?> <CR> ..
Time Command
TIME <hhmmss> <CR> …………..…
Software Version Command
VER <CR> ………………………………..
JPS Communications, Inc.
5-2