JPS RTU-292 - Audible Ring Command; Auto Answer Command; NULL Command

RTU-292 Operations Manual
5.3.1 NULL Command
<CR>
This command may be used as a quick way to insure that RS-232 communication with the RTU-292 is
functioning. The command has no parameters.
Expected Response: NULL Response.
Example:
<CR> ; Command sent to the RTU-292.
% E0 <CR> ; Status returned from the RTU-292.
5.3.2 Auto Answer Command
AUTO_ANS <ON|OFF|?> <CR>
This command is to enable, disable or query the current status of Auto Answer.
Expected Response: Auto Answer Response.
Examples:
AUTO_ANS ON <CR> ; Command to enable Auto Answer.
%AUTO_ANS ON E0 <CR> ; Status returned showing that Auto Answer is on.
AUTO_ANS ? <CR> ; Command requesting the status of Auto Answer.
%AUTO_ANS OFF E0 <CR> ; Status returned showing that Auto Answer is not enabled.
5.3.3 Audible Ring Command
AUD_RING <ON|OFF|?> <CR>
This command is to enable, disable or query the current status of Audible Ring.
Expected Response: Audible Ring Response.
Examples:
AUD_RING ON <CR> ; Command to enable the audible ring.
%AUD_RING ON E0 <CR> ; Status returned showing that audible ring is on.
AUD_RING ? <CR> ; Command requesting the status of audible ring.
%AUD_RING OFF E0 <CR> ; Status returned showing that audible ring is disabled.
JPS Communications, Inc.
5-3