JPS RTU-292 - Speaker Phone Response; Speaker Radio Response

RTU-292 Operations Manual
5.4.10 Speaker Phone Response
%SPKR_PH <ON|OFF> Exx <CR>
Type: Synchronous.
Response To: Speaker Phone Command.
This response indicates the Speaker Phone path status.
Examples:
%SPKR_PH ON E0 <CR> ; Status indicating that the Speaker Phone path is enabled.
%SPKR_PH OFF E0 <CR> ; Status returned indicating that the Speaker Phone path is disabled.
5.4.11 Speaker Radio Response
%SPKR_RAD <ON|OFF> Exx <CR>
Type: Synchronous.
Response To: Speaker Radio Command.
This response indicates the Speaker Radio path status.
Examples:
%SPKR_RAD ON E0 <CR> ; Status indicating that the Speaker Radio path is enabled.
%SPKR_RAD OFF E0 <CR> ; Status returned indicating that the Speaker Radio path is disabled.
JPS Communications, Inc.
5-15