3
Usage Hints
When installing this set, be sure to connect
the grounding wire to the grounding
terminal of the set. Otherwise, an electric
shock can result when a failure or leakage
occurred on the set.
Do not damage, break or modify the power
cord.
Placing a heavy load, heating, pulling or
forcibly bending the cord can damage it
resulting in a fire or an electric shock.
Do not use this set at a voltage other than
the supply voltage stated on the set.
Otherwise, a fire, an electric shock or
system failure can result.
Do not touch inside the set with wet hands.
When your hands are wet, don’t try to
connect or disconnect the power cord or
touch the switches. Otherwise, an electric
shock can result.
WARNING
To Next Page
Loading...
