EasyManua.ls Logo

JRC JCY-1850 - Page 16

JRC JCY-1850
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Operation
2
The options configuration of the equipment is shown in Table 2.
Table 2: Options Configuration
No. Name of Optional Component Type Name Function
1 Microphone Unit NVT-161
y To use an “Exposed” type, remove the flange of
“Built in the ceiling” one.
y Maximum nine sets of microphones can be
installed, inclusive of standard configuration.
2 Waterproof Microphone Unit NVT-162
y Records the conversation in the wing and outputs
into the Recording Control Unit.
y Maximum nine sets of microphones can be
installed, inclusive of standard configuration and
NVT-161 type.
3 Frame Grabber Board Kit 7ZZJD0052
y Kit for recording RADAR image.
y Consists of; CKA-137(FGB), BNC-Dsub15 cable
(1pc.), LAN cable, BNC-JJ (5pc.), BNC connector
for 3C-2V (5pc.)
y Installed in the NDV-1850.
4 Second Video Channel Kit 7ZZJD0055
y Kit for second RADAR video channel.
y Consists of; BNC-JJ (5pcs.) BNC-Dsub15 cable
(1pc.), BNC connector for 3C-2V (5pc.)
y Installed in the NDV-1850.
5 Radar Interface Unit NWP-46
y Required when connecting the radar of UXGA
display.
Accessories
6 Spare Parts for the RIF 7ZXJD0093
y Spares for the NWP-46
y Fan, Fuse
ATTENTION
When radar images cannot be recorded, the output data of AIS must be
recorded instead.

Table of Contents

Other manuals for JRC JCY-1850

Related product manuals