JRC JCY-1850 - 2.8 General Environmental Condition; 2.8.1 Location

2. Specification
35
(2) Performance:
a) Basic performance: It is the same as the Radar image input specification of the
Recording Control Unit.
b) Communication port To the NDV-1850 RCU via Ethernet
(3) Environmental condition:
a) Operating temperature: -15 deg. to +55 deg. (IEC 60945 protected type)
b) Temperature and humidity: +40°C, 93%
c) Vibration: 2Hz to 13.2Hz ±1.0mm
13.2Hz to 100Hz 0.7G
(4) General specification
a) Power voltage: 100 - 120Vac +/- 10% 1-phase 50/60Hz (IEC 60945)
200 - 240Vac +/- 10% 1-phase 50/60Hz (IEC 60945)
b) Power consumption: 10VA
c) Size: 255(w) x 160(d) x 72(h) mm
d) Mass: 1.5kg
e) Color: N4 semi-gloss
2.8 General Environmental Condition
2.8.1 Location
a) Usage Conditions:
Vessels required to carry S-VDR:
Mercantile vessels of 3,000G/T or more that are engaged in
international voyage
b) Unit installation locations:
1) The Protective Capsule Unit: External deck above bridge
2) The Connection Box: External deck above bridge
3) The Recording Control Unit: Bridge (or electric room)
4) The Operation Panel Unit: Navigation space in the Bridge
5) The Microphone Unit: Ceiling or bulkhead
6) The Waterproof Microphone Unit: Wings
7) The Radar Interface Unit: near the Radar
c) Installation methods:
1) The Protective Capsule Unit: Mounted on the deck
2) The Connection Box: Mounted on the deck
3) The Recording Control Unit: Hung on the bulkhead
4) The Operation Panel Unit: Hung on the bulkhead or flash
mount on the Console
5) The Microphone Unit: Flash mount on the Ceiling or hung
on the bulkhead
6) The Waterproof Microphone Unit: Hung on the bulkhead
7) The Radar Interface Unit: Mounted on the Radar