JRC JCY-1850 - 1.4.5 Stopping the Audible Alarm on the Operation Panel Unit

1. Operation
9
Case 2: Carrying on the voyage is not possible as the accident is serious…
Step
Actions
Operation of RCU Ref.
1 Stop recording data onto the S-VDR
when voyage is stopped by the accident.
Press the REC STOP SWITCH.
Make sure that the REC LED is
turned off.
Section
1.4.1
2 Stop recording data onto the CF CARD. Press the CARD STOP SWITCH.
Make sure that the CARD LED is
turned off.
Section
1.4.3
3 Take out the CF CARD from RCU. Press the CARD EJECT BUTTON. Section
1.4.3
4 Copy the record data from the CF CARD
to HDD of PC.
Check the copied data.
(Each folder name shows the date and
time when the data was recorded)
Section
1.4.3
5 Return the CF CARD to RCU after
copying
Make sure that the CARD LED
lights up.
Section
1.4.3
6 Do not restart recording data onto
S-VDR.
Case 3: The danger of life to the crew is pressing as the accident is very serious…
Escape from the vessel first. Leave S-VDR as it is.
2 hours after the main power blackout, S-VDR stops recording data automatically.
The capsule will be collected and the and the record data will be recovered
therewith.
ATTENTION
To copy data from a CF CARD, a PC with PCMCIA slot is needed. If the PC
in the ship is not the case, contact us. A standard laptop PC has a PCMCIA
slot.
Reference)
The operation of the REC STOP SWITCH and the CARD STOP SWITCH and the
record media
Switch Record onto capsule Record onto CF CARD Take out CF CARD
REC STOP
Stop to record Stop to record Impossible
CARD STOP
Continue to record Stop to record Possible
1.4.5 Stopping the Audible Alarm on the Operation Panel Unit
In case the ALARM BUZZER on the Operation Panel Unit sounds:
1) Press the ACK SWITCH on the Operation Panel Unit.
2) Then the ALARM BUZZER on the Operation Panel Unit stops.
3) If more than one alarm are detected, press the ACK SWITCH as many times as the