JRC JCY-1850 - Page 39

1. Operation
25
Table 9: The conversion table of a code and equipment
A connection channel is displayed when the equipment which is not defined by the following
table is connected. The codes from 01 to 16 identify connection channel.
ALARM DETAIL
SYSYTEM CODE
Equipment
6 0 / 1 4 1
GPS
4 2
AIS
4 3
Speed Log
4 4
Gyro Compass
4 5
Auto Pilot
4 6
Rudder Angle Indicator
4 7
Echo Sounder (Bow)
4 8
Anemometer
4 9
Engine Telegraph
5 0
M/E Remote Control System
5 1
ECDIS
5 2
Thruster
5 3
Bow1 Thruster
5 4
Bow2 Thruster
5 5
Stern1 Thruster
5 6
Stern2 Thruster
5 7
Hull Stress Monitor
5 8
Radar
5 9
Echo Sounder(Stern)
6 0
Digital Signal Converter 1 (VDR option unit)
6 1
Digital Signal Converter 2 (VDR option unit)
6 2
Digital Signal Converter 3 (VDR option unit)
6 3
Digital Signal Converter 4 (VDR option unit)
6 4
Digital Signal Converter with optional A/D Converter 1 (VDR option unit)
6 5
Digital Signal Converter with optional A/D Converter 2 (VDR option unit)
6 6
Digital Signal Converter with optional A/D Converter 3 (VDR option unit)
6 7
Digital Signal Converter with optional A/D Converter 4 (VDR option unit)
6 8
NAV-I/F unit (VDR option unit)
6 9
Spare
7 0
External NSK unit (NCT-27)
7 1
Main GPS and Sub GPS with Switcher
7 2
Sub GPS (connection with a CH different from the Main GPS)
7 3
Magnetic Compass
3 3
NSK Interface board for Heading
3 4
NSK Interface board for Ship speed