Chapter 3 Operation Method 3-2
3.1 Basic Operation
3.1.1 Power Supply ON/OFF
1 Long press the power supply button for about 1sec.
The power supply is turned on and the start screen is displayed.
The screen is switched to the normal screen after 30 seconds. Please do not shut down the
main display before the vessel speed is displayed.
If the power supply button is long pressed again, the shutdown screen, which is the same as the
start screen, is displayed, the power supply is turned off after 30 seconds, and the screen is
cleared.
Notice: Do not shut down the system until the normal screen displaying.
To Next Page
Loading...